Ignition Switch Replacement in tampa


I suppose that in these cases, the first question one asks is: “If my key does not turn in the ignition, what do I do?” As usual, it is best to always start with the simplest things. Below, we’ll look at possible solutions you can use to fix a car key that won’t turn in the ignition.

1.   Slightly move the steering wheel and turn the key in the lock.

The most common reason for not turning the car key in the lock is the steering wheel lock. This happens when moving the steering wheel after removing the key from the ignition. If you notice that the key does not turn in the ignition lock, you can try the following:

  1. Slightly turn the steering wheel left and right.
  2. Observe where the steering wheel cannot be turned and the direction it has gone.
  3. Move the steering wheel slowly in the direction that allowed us to turn it earlier and hold it there.
  4. Turn the ignition switch to the “accessories” position by turning the steering wheel.
  5. If nothing else, turn the wheel while turning the key.
  6. If that does not help, turn the steering wheel when turning the ignition key.

You can combine turning the steering wheel with moving the key. By turning the key, the steering wheel opens, and the car must start. If the key still does not turn, you may have a more serious problem.

2.   Lubricate the lock

One possible reason when a key does not turn in the ignition is that the key slot in the ignition cylinder is somewhat stuck. Simple lubrication of the lock may be enough to solve the problem. Many will think that products like WD40 or similar are the ideal solution, but I would not recommend such products in these cases.

It’s a classic debate in both the locksmith and locksmith community about which is the best lubricant for a lock. So, I recommend using a lock lubricant at the risk of starting an argument on the subject. Silicone or graphite-based lubricant. You’re basically looking for something that won’t, over time, cause a buildup of dust, dirt, and particles, which will eventually further clog the internal components of the car lock.

  1. Take the lubricant, the car key and a cloth.
  2. Spray the lubricant on the starter cylinder.
  3. Wipe away any excess product that may have seeped through the lock.
  4. Insert the key and turn it.
  5. If this doesn’t work, move the key slightly inside the cylinder and try again.
  6. If it doesn’t work, add more lubricant and repeat the procedure.

If, after a few minutes and after a couple of tries, the car key still won’t turn in the lock, this type of solution will not fix the problem.

3.   Check the key we are using.

Sometimes the problem is with the key that is being used. If the key we are trying to use is broken or worn, the ignition will not start. Many times copies can be made of a broken car key. Simply cut a new blade, replacing the old damaged blade, and thus it will be possible to fix a car key that does not turn in the ignition. In this way, it will not be necessary to buy a new remote control for the car, with all that this implies.

The most imperative part of this process is finding out why the car key is not working. It will then allow you to discover the cause of the problem and what could be the quickest and cheapest solution. If you think the problem may be caused by the key you are using, you can try the following:

  • Try a spare key. (You should have at least one!)
  • Relate the car key that won’t turn in the ignition with the spare key.
  • Check the key blade for wear on its teeth or shape.
  • Check for kinks, warping, or breakage in the key. Fixing the faucet can be very simple and inexpensive. You just need to know what is erroneous.

4.   Replace the key that does not work in the lock.

When something goes wrong with your car key, the easiest solution is to replace it. There is always a way to copy a broken car key. No matter how the key is broken, there is a solution.

There are several ways to cater to this type of issue:

  • Find a hardware store where they duplicate car keys.
  • Contact a specialized car locksmith.
  • Contact the official dealer.

Depending on the cost of copying the car key, the price of the key may be higher or lower depending on the format you made. Contacting an authorized dealer is the best option because it doesn’t require research or prior work. However, it can be expensive and time consuming for you as compared to a locksmith. Hence, we recommend that you contact a specialist car locksmith for these types of cases. This will allow you to obtain the best price on car keys and, at the same time, have a professional and personalized solution.

5.   Replace starter cylinder

If the problem is not with the key, then your car key may not be turned due to a bad ignition. In some cases, the lock can be repaired, and in this way, you will have a quick and cheap solution. And don’t worry, you won’t have to replace the entire set of locks or the entire car’s immobilizer system.

6.   Call a specialist auto locksmith in Tampa.

When you start by saying, “My car key won’t start,” you can end by saying, “I need a locksmith near Tampa, FL.” A locksmith can help you with any issue where your car key won’t turn in the ignition. If you are worried about how much it costs to call a locksmith for your car, you have to know that the price will be much more reasonable than other professional options. There are three main reasons why the key won’t turn in the ignition.

Let’s see how a locksmith can help:

     I.        The Key does not turn in the ignition due to the steering wheel lock

For something as simple as a steering wheel lock, contacting a locksmith is unlikely to be necessary. It would be good if you first have a lot of patience to carry out the process defined in the first section of this article (move the steering wheel and turn the key).

If you have a new car, it is unlikely that the key or lock is worn. But if there is any evidence of an attempted break-in and damage to the lock, the reason the key won’t turn may not be as simple as unlocking the steering wheel. In this case, if you can’t unlock the steering wheel and you don’t know why the key won’t start the engine, that’s when you should call a Locksmith Riverview.

   II.        The key does not turn in the ignition due to a problem with the key.

If you are facing issue in your car key, a car key specialist is often an ace option to fix a car key that won’t turn in the ignition. Unless you have a spare key, options like the hardware store will not be able to give you a duplicate once the key is broken.

A professional Locksmith dedicated to solving this type of problem will have specific key cutting machines. Besides, they have different types of tools for each type of car. If the key you have is badly worn or breaks, that’s no problem as a new key can be cut from the code. In these cases, a locksmith will be able to offer you different options of keys and prices.

  III.        The key does not go in due to a problem with the starter cylinder.

Problems with starter cylinders are some of the most difficult to detect and correct. The replacement of the cylinder can be quite complicated in this particular case, in which the key cannot be turned in the ignition. Removing the plastics from the steering wheel, or manipulating the key as necessary, can cause other types of damage than the one you are trying to repair. When your car key doesn’t start, go to a locksmith first and get their opinion.

Final thoughts

Diagnosing why the car key won’t turn in the ignition is the best way to correct the problem. If you cannot determine the problem with your car, it is best to contact a professional. And if you are in Tampa and have problems with your car keys, don’t hesitate to contact our Emergency Locksmith in Tampa.

Leave a Comment

Your email address will not be published. Required fields are marked *